铜官山S状背斜构造综合解析
doi: 10.3799/dqkx.2019.974
Structural Synthesis Analysis of S-Shaped Anticline in Tongguanshan
-
摘要: 通过褶皱、断裂、节理、线理等构造形迹的系统观测对铜官山S状背斜的形成过程和机制进行了综合构造解析，发现该背斜经过了3次构造变形，2次构造叠加复合.早期NE向褶皱的S状弯曲是由于前期EW向断裂限制的结果；晚期S状弯曲是由于新华夏构造应力场导致轴近水平的麻花状旋扭的结果；还通过物理模拟和数字模拟验证了限制型及麻花型S状构造形成机制.值得注意的是，通过铜官山S状背斜的综合构造解析可以扩大到整体下扬子台褶带的构造演化力学解析.从而证明根据局部地区的构造综合解析才是认识区域大地构造运动方式、方向及其变化最直接、最可靠的证据.
-
关键词:
- S状背斜 /
- 构造综合解析 /
- 限制型S状褶皱 /
- 麻花状褶皱 /
- 构造模拟 /
- 构造地质
Abstract: In this paper, comprehensive structural analysis of the formation process and formation mechanism of the S-shaped anticline of Tongguanshan is carried out through systematical observation of folds, faults, joints and lineation. It is found that there have been three stages of structural deformation and two structures superimposed and compounded. The S-bend of the early NE-fold is due to the limitation of the EW-direction faults. Late S-shaped bending is the result of the near-horizontal twisting due to the Newcathaysian tectonic stress field. It also verifies the formation mechanics of restricted and twisted S-shaped structures by physical simulation and numerical simulation. It is worth noting that the structural synthesis analysis of the S-shaped anticline of Tongguanshan can be expanded to the geomechanics analysis of the formation and evolution of the whole Lower Yangtze platform fold belt, showing that the detailed structural synthesis analysis of the local typical structures is the scientific basis for studying the manner and direction of the movements.-
Key words:
- S-shaped anticline /
- structural synthesis analysis /
- restricted S-shaped fold /
- twist-shaped fold /
- structural simulation /
- tectonics
-
图 1 下扬子构造带简图
1.坳陷带；2.隆褶带；3.褶皱轴线；4.断裂
Fig. 1. Sketch map of Lower Yangtze River tectonics
下载:
全尺寸图片
幻灯片
图 2 铜陵地块中S状褶皱群
1.北北东向断裂；2.北东向断裂；3.东西向断裂；4.直立褶皱；5.歪斜褶皱；6.倒转褶皱
Fig. 2. S-shaped folds within Tongling massif
下载:
全尺寸图片
幻灯片
图 3 铜官山背斜地质图
1.第四系；2.第三系；3.三叠系；4.二叠系-石炭系；5.泥盆系-志留系；6.闪长斑岩；7.石英闪长岩；8.倒转背斜轴线；9.背斜轴线；10.向斜轴线；11.NE向逆冲断层；12.斜冲断层；13.正断层；14.东西向冲断层；15.平推断层；16.撕裂断层；17.挤压带；18.NE向小褶皱；19.膝状挠曲
Fig. 3. Geological map of Tongguanshan anticline
下载:
全尺寸图片
幻灯片
图 4 铜官山S状背斜联合横剖面图及π圆图解数据
1.三叠系南陵湖组; 2.塔山组; 3.小凉亭组; 4.二叠系大隆组; 5.龙潭组; 6.孤峰组; 7.栖霞组; 8.二叠系；9.石炭系；10.泥盆系五通组; 11.茅山群；12.坟头组；13.高家边组；14.闪长斑岩; 15.石英闪长斑岩；16. π圆（β:枢纽产状; S1:轴面产状; A/λ:波幅/波长）；17.正断层；18.断层
Fig. 4. United cross sections of the TGS S-shaped anticline and graphic solution date of π circle
下载:
全尺寸图片
幻灯片
图 5 两翼层间同向牵引褶皱(a)、剪力流(b)和层面斜向擦线(c)
Fig. 5. The same form drag folds plane in both limbs (a), shear flow (b) and oblique striation on the bending (c)
下载:
全尺寸图片
幻灯片
图 6 铜官山S背斜不同段落褶皱形态、形成机制及力学性质
Fig. 6. Geometric shape, formation mechanism and mechanical properties of different sections of S-shaped anticline in TGS
下载:
全尺寸图片
幻灯片
图 7 铜官山S状背斜伴生断层
1.泥盆系-三叠系中统；2.志留系；3.石英闪长岩体；4.闪长斑岩体；5.压-压扭性断层；6.张性断层；7.扭性断层；8.剪刀式断层；9.断层密集度；10.倒转背斜
Fig. 7. Associated faults of Tongguanshan anticline
下载:
全尺寸图片
幻灯片
图 8 撕开型剪刀式断层生长演化过程示意
a.张开型；b.滑开型；c.撕开型
Fig. 8. Tear-off scissor-type fault growth evolution process
下载:
全尺寸图片
幻灯片
图 9 铜官山背斜枢纽起伏示东西向褶皱叠加
Fig. 9. The hinge of anticline is wavy and the axis in EW direction
下载:
全尺寸图片
幻灯片
图 10 灰岩采场走向EW的叠瓦状逆冲断层野外照片(a)和灰岩采场走向EW的叠瓦状逆冲断层素描图(b)
C2+3.黄龙、船山组灰岩；P1q.栖霞灰岩；f1, f3, f7.扭性断层NW330°∠80°；f2, f4, f5, f6, f8.压性断层；f9.白色燧石层；f10.黄铁矿、闪锌矿、方铅矿；f11.透镜状构造
Fig. 10. The photo of EW strike imbricate thrust (a) and the sketch of EW strike imbricate thrust (b)
下载:
全尺寸图片
幻灯片
图 11 碎石岭近EW向压性破碎带
Q.第四系；P2l.二叠系龙潭组；1~3.扭性断裂NE45°∠85°；4~8.压性断裂NWW280°∠85°；9.透镜状构造
Fig. 11. EW strike pressure fracture zone
下载:
全尺寸图片
幻灯片
图 12 近EW向叠加小褶皱被轴近水平旋扭(a)和沿NNE向轴旋扭的近EW向小褶皱(b)
①②③④⑤表示5个倾伏小褶皱( 表 2)
Fig. 12. Nearly EW to the small folds (a) and nearly EW-trending small folds twisting along the axis of NNE (b)
下载:
全尺寸图片
幻灯片
图 13 铜官山S状背斜共轭节理等密图(a)、石耳山节理分期配套照片(b)和石耳山节理分期配套素描图(c)
1.NW340°SW∠82°；2.NW295°NE∠82°；3.NE50°NW∠60°；4.NW320°NE∠82°；5.NW345°SW∠85°；6.NW273°SW∠84°
Fig. 13. Conjugate shear joint density diagram of the Tongguanshan S-shaped anticline (a), the photo of joints division period division and matching (b) and the sketch of joints period and matching (c) in Shiershan
下载:
全尺寸图片
幻灯片
图 14 NE向构造期主应力轨迹线
1.第四系；2.第三系；3.中三叠统头山组；4.中三叠统分水岭组；5.中三叠统南陵湖组；6.下三叠统塔山组；7.下三叠统小凉亭组；8.上二叠统大隆组；9.上二叠统龙潭组；10.下二叠统孤峰组；11.下二叠统栖霞组；12.下石炭统黄龙船山组；13.泥盆系上统五油组；14.泥盆系上梵五通组；15.茅山群；16.坟头组；17.石英闪长岩；18.铁帽；19.倾伏背斜；20.背向形挠曲；21.倒转背斜；22.小背斜；23.压性，压扭性断层；24.张性断层；25.扭性断层；26.陡立及直立岩层带；27.劈理带；28.节理统计点；29.最大主应力(σ)连线；30.最小主应力(σ)迹线；31.产状(°)
Fig. 14. The map showing principal stress trajectories of NE tectonic period
下载:
全尺寸图片
幻灯片
图 15 EW向构造期主应力轨迹
1.第四系；2.第三系；3.中三叠统头山组；4.中三叠统分水岭组；5.中三叠统南陵湖组；6.下三叠统塔山组；7.下三叠统小凉亭组；8.上二叠统大隆组；9.上二叠统龙潭组；10.下二叠统孤峰组；11.下二叠统栖霞组；12.下石炭统黄龙船山组；13.泥盆系上统五油组；14.泥盆系上梵五通组；15.茅山群；16.坟头组；17.石英闪长岩；18.铁帽；19.倾伏背斜；20.背向形挠曲；21.倒转背斜；22.小背斜；23.压性，压扭性断层；24.张性断层；25.扭性断层；26.陡立及直立岩层带；27.劈理带；28.节理统计点；29.最大主应力(σ)连线；30.最小主应力(σ)迹线；31.产状(°)
Fig. 15. The map showing principle stress trajectories of E-W tectonic period
下载:
全尺寸图片
幻灯片
图 16 新华夏系主应力轨迹
1.第四系；2.第三系；3.中三叠统头山组；4.中三叠统分水岭组；5.中三叠统南陵湖组；6.下三叠统塔山组；7.下三叠统小凉亭组；8.上二叠统大隆组；9.上二叠统龙潭组；10.下二叠统孤峰组；11.下二叠统栖霞组；12.下石炭统黄龙船山组；13.泥盆系上统五油组；14.泥盆系上梵五通组；15.茅山群；16.坟头组；17.石英闪长岩；18.铁帽；19.倾伏背斜；20.背向形挠曲；21.倒转背斜；22.小背斜；23.压性，压扭性断层；24.张性断层；25.扭性断层；26.陡立及直立岩层带27.劈理带；28.节理统计点；29.最大主应力(σ)连线；30.最小主应力(σ)迹线
Fig. 16. The map showing principal stress trajectories of Neocathaysian
下载:
全尺寸图片
幻灯片
图 17 铜陵地块边界条件(a)和递进变形模拟(1)(b)
Fig. 17. Boundary conditions of Tongling land mass (a) and model experiment of progressive deformation (1) (b)
下载:
全尺寸图片
幻灯片
图 18 模拟边界条件及应变主轴线变位(a)、有限单元模型(b)和最大主应变迹线(据有限单元法)(c)
图c：1.最大主应变方向；2.最大主应变线
Fig. 18. Simulation of boundary conditions and geometrical parameters of fold axis changes (a), finite element model (b) and trajectory of maximum strain (by finite element method) (c)
下载:
全尺寸图片
幻灯片
图 19 递进变形模拟(2)
Fig. 19. Model experiment of progressive deformation (2)
下载:
全尺寸图片
幻灯片
图 20 网格法扭转前后应变花(a)和扭转后轴面形态(b)
Fig. 20. Strain flower grids before and after deformation (a) and axial surface shape after twisting (b)
下载:
全尺寸图片
幻灯片
图 21 扭转变形后的展平(a)和展平后的主应力迹线(b)
Fig. 21. Main stress traces after flattening (a) and flattening after twisting deformation (b)
下载:
全尺寸图片
幻灯片
表 1 铜陵地块中S状背斜的形态及产状
Table 1. Morphology and attitude of the S-shaped anticlines in Tongling massif
褶皱名称 褶皱轴面产状 褶皱形态 北段 中段 南段 北段 中段 南段 铜官山背斜 走向NE45°，倾向SE，倾角72° 走向NE30°，倾向SE，倾角72° 走向NE65°，倾向NW，倾角60° 倒转 直立 倒转 背山背斜 走向NE60°，倾向SE，倾角62° 走向NE35°，倾角90° 走向NE70°，倾向NW，倾角60° 斜歪 直立 斜歪 永村桥背斜 走向NE70°，倾向SE，倾角72° 走向NE50°，倾角90° 走向NE85°，倾向NW，倾角60° 斜歪 直立 斜歪 仙水冲背斜 走向NE65°，倾向SE，倾角82° 走向NE40°，倾角90° 走向NE65°，倾向NW，倾角82° 斜歪 直立 斜歪 丫山背斜 走向NE60°，倾向SE，倾角62° 走向NE50°，倾角90° 走向NE75°，倾向NW，倾角40° 倒转 直立 倒转
下载: 导出CSV
表 2 旋扭叠加小褶皱枢纽形状及产状
Table 2. Morphology and attitude of small fold hinge with rotating compound
编号 倾向(°) 倾角(°) 形态 ① 302 78 向上凸 ② 275 20~50 向上凸 ③ 305 24 较平直 ④ 300 30~50 向下凹 ⑤ 278 46 向下凹
下载: 导出CSV
代做工资流水公司湘潭房贷银行流水 制作开封工资流水app截图公司常州代办公司流水泰安入职工资流水代开厦门银行流水账制作赣州工资流水报价邢台在职证明代做江门办理对公银行流水包头银行流水账打印湖州办理车贷流水岳阳办贷款流水成都打银行流水账单泰安查企业贷流水湛江打车贷流水西宁对公银行流水制作淄博自存流水图片珠海银行流水公司杭州企业对私流水价格荆州签证流水开具沈阳流水单代办咸阳转账银行流水图片长沙银行对公流水多少钱宿迁企业流水打印代办新乡自存流水代做许昌流水多少钱漳州银行对公流水代办洛阳查个人银行流水德阳工资银行流水打印肇庆制作自存流水江门签证工资流水模板香港通过《维护国家安全条例》两大学生合买彩票中奖一人不认账让美丽中国“从细节出发”19岁小伙救下5人后溺亡 多方发声卫健委通报少年有偿捐血浆16次猝死汪小菲曝离婚始末何赛飞追着代拍打雅江山火三名扑火人员牺牲系谣言男子被猫抓伤后确诊“猫抓病”周杰伦一审败诉网易中国拥有亿元资产的家庭达13.3万户315晚会后胖东来又人满为患了高校汽车撞人致3死16伤 司机系学生张家界的山上“长”满了韩国人？张立群任西安交通大学校长手机成瘾是影响睡眠质量重要因素网友洛杉矶偶遇贾玲“重生之我在北大当嫡校长”单亲妈妈陷入热恋 14岁儿子报警倪萍分享减重40斤方法杨倩无缘巴黎奥运考生莫言也上北大硕士复试名单了许家印被限制高消费奥巴马现身唐宁街 黑色着装引猜测专访95后高颜值猪保姆男孩8年未见母亲被告知被遗忘七年后宇文玥被薅头发捞上岸郑州一火锅店爆改成麻辣烫店西双版纳热带植物园回应蜉蝣大爆发沉迷短剧的人就像掉进了杀猪盘当地回应沈阳致3死车祸车主疑毒驾开除党籍5年后 原水城县长再被查凯特王妃现身！外出购物视频曝光初中生遭15人围殴自卫刺伤3人判无罪事业单位女子向同事水杯投不明物质男子被流浪猫绊倒 投喂者赔24万外国人感慨凌晨的中国很安全路边卖淀粉肠阿姨主动出示声明书胖东来员工每周单休无小长假王树国卸任西安交大校长 师生送别小米汽车超级工厂正式揭幕黑马情侣提车了妈妈回应孩子在校撞护栏坠楼校方回应护栏损坏小学生课间坠楼房客欠租失踪 房东直发愁专家建议不必谈骨泥色变老人退休金被冒领16年 金额超20万西藏招商引资投资者子女可当地高考特朗普无法缴纳4.54亿美元罚金浙江一高校内汽车冲撞行人 多人受伤
-
Billings, M.P., 1972.Structural Geology.Prentice-Hall International, Inc., London. Gzovsky, M.V., 1975.Bases of Tectonophysics.Institute of Physics of the Earth, Moscow, 81-102. Hancock, P.L., 1983.Foundations of Structural Geology.Journal of Structural Geology, 5(2):221. https://doi.org/10.1016/0191-8141(83)90047-0 Hobbs, B.E., Means, W.D., Willams, P.E., 1976.An Outline of Structural Geology.John Wiley & Sons, Inc., Hoboken. Lee, J.S., 1947.The Basis and Method of Geomechanics.Zhonghua Book Company, Beijing (in Chinese). Lee, J.S., 1973.Introduction to Geomechanics.Science Press, Beijing, 13-120(in Chinese). Li, D.X., 1980.On S-Shaped Structure.Proceedings of Structural Geology, (1):111-124(in Chinese). http://d.old.wanfangdata.com.cn/OAPaper/oai_arXiv.org_1205.4534 Li, D.X., 2003.Dynamics of Rotation-Shear Structures:Theory, Method and Application.Geological Publishing House, Beijing (in Chinese). Li, D.X., 2009.System Classification and System Analysis of Compounding of Structures.In:Commemorating Li Siguan's 120th Birthday Conference Proceedings.Institute of Geomechanics, Beijing, 109-112(in Chinese). Li, D.X., 2015.Synthetical Analyses of the Formation and Deformation of the Beiling Syncline in Fangshan, Beijing.Geoscience, 29(3):481-493(in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=xddz201503001 Li, D.X., Deng, Z.L., Lei, S.H., 1988.Control of Ore Deposits by Compounding of Structures and Neocathaysian Structural System in Tongguanshan.Collected Works of Geomechanics (7).Geological Publishing House, Beijing (in Chinese). Li, D.X., Long, C.X., 2016.J.S.Lee:Earth System Science Pioneer.Journal of Geomechanics, 22(4):1062-1066(in Chinese with English abstract). http://d.old.wanfangdata.com.cn/Periodical/gywsw201704001 Li, D.X., Tan, Y.A., 1989.S-Shaped Structures of Restrictive Type & Its Simulating Experiment-Taking the Tongling Area as an Example.Geoscience, 3(3):309-318(in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-XDDZ198903005.htm Li, D.X., Wen, C.S., 1983.System Analysis of Compounding of Structures.Earth Science, (3):33-42(in Chinese with English abstract). http://d.old.wanfangdata.com.cn/OAPaper/oai_pubmedcentral.nih.gov_165460 Li, D.X., Zhou, J.Y., 1986.Textbook to Geomechanics.Geological Publishing House, Beijing (in Chinese). Li, Z.D., 2001.New Century:The Unification of Micro and Macro.Science News Weekly, (12):1(in Chinese). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=10.1177/004711789501200504 Li, Z.K., 1985.Introduction of Major Tectonic Systems in Anhui Province.Geological Publishing House, Beijing, 169-190(in Chinese). Liu, W.C., Li, D.X., 1993.The Deformation Characteristics of Folding Structures and Their Interfering Depths in the Tongling Area of Anhui.Geology of Anhui, 3(4):1-9(in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-AHDZ199304000.htm Liu, W.C., Li, D.X., Gao, D.Z., 1996.Analysis of the Time Sequence of Compounding of Structural Deformation Systems and the Resulting Effects in Tongling Area.Journal of Geomechanics, 2(1):42-48(in Chinese with English abstract). http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600065168 Ma, X.Y., 1983.On Analytical Tectonics.Earth Science, (3):1-9(in Chinese with English abstract). http://d.old.wanfangdata.com.cn/OAPaper/oai_doaj-articles_2f50f9b75a79569e142b6c1c27ad17e7 Ma, X.Y., 2004.Analytical Tectonics.Geological Publishing House, Beijing, 10-18(in Chinese). Qian, X.S., 2007.Building Systems Science.Shanghai Jiaotong University Press, Shanghai (in Chinese). Ramsay, J.G., 1967.Folding and Fracturing of Rocks.McGraw-Hill Book Company, New York, 391-429, 519-553. Ramsay, J.G., Huber, M.I., 1983.The Techniques of Modern Structural Geology.Volume 1:Strain Analysis.Academic Press, Cambridge, 96-112, 135-179. Ramsay, J.G., Huber, M.I., 1989.The Techniques of Modern Structural Geology.Volume 2:Folds and Fracture.Academic Press, Cambridge, 27-31. Spencer, E.W., 1988.Introduction to the Structure of the Earth (Third Edition).McGraw-Hill Book Company, New York, Tan, Y.A., Li, D.X., 1987.Twisted S-Type Folds and Its Model Experiment with the Tongguanshan Anticline as an Example.Geoscience, 11(1):114-122(in Chinese with English abstract). http://en.cnki.com.cn/Article_en/CJFDTOTAL-XDDZ198701009.htm Yang, S.N., Yang, W.R., 1985.China Regional Geotectonics.Geological Publishing House, Beijing, 106(in Chinese). Zhu, Z.C., 1990.Structural Geology.China University of Geosciences Press, Wuhan, 81-126, 128-141(in Chinese). 李四光, 1947.地质力学之基础与方法.北京:中华书局. 李四光, 1973.地质力学概论.北京:科学出版社. 李东旭, 1980.论S状构造.构造地质论丛, (1):111-124. http://d.old.wanfangdata.com.cn/Periodical/cdlgxyxb200103010 李东旭, 2003.旋扭构造动力学——理论、方法及应用.北京:地质出版社. 李东旭, 2009.构造复合系统分类及系统解析.见: 纪念李四光诞辰120周年会议论文摘要集.北京: 地质力学研究所, 109-112. 李东旭, 2015.北京房山北岭向斜形成与形变综合解析.现代地质, 29(3):481-493. doi: 10.3969/j.issn.1000-8527.2015.03.001 李东旭, 邓兆伦, 雷世和, 1988.铜官山矿田构造复合及新华夏系控矿意义.地质力学文集(七).北京:地质出版社. 李东旭, 龙长兴, 2016.地球系统科学的先驱——李四光.地质力学学报, 22(4):1062-1066. doi: 10.3969/j.issn.1006-6616.2016.04.022 李东旭, 谭以安, 1989.限制型S状构造及其模拟:以铜陵地区为例.现代地质, 3(3):309-318. http://www.cnki.com.cn/Article/CJFDTotal-XDDZ198903005.htm 李东旭, 温长顺, 1983.构造复合系统分析.地球科学, (3):33-42. http://www.cnki.com.cn/Article/CJFDTOTAL-DQKX198303003.htm 李东旭, 周济元, 1986.地质力学导论.北京:地质出版社. 李政道, 2001.新世纪:微观与宏观的统一.科学新闻, (12):1. http://d.old.wanfangdata.com.cn/Periodical/ddwt201706026 李自堃, 1985.安徽省主要构造体系概论.北京:地质出版社, 169-190. 刘文灿, 李东旭, 1993.安徽铜陵地区褶皱变形特征及其影响深度探讨.安徽地质, 3(4):1-9. http://www.cnki.com.cn/Article/CJFDTotal-AHDZ199304000.htm 刘文灿, 李东旭, 高德臻, 1996.铜陵地区构造变形系统复合时序及复合效应分析.地质力学学报, 2(1):42-48. http://www.wanfangdata.com.cn/details/detail.do?_type=perio&id=QK199600065168 马杏垣, 1983.解析构造学刍议.地球科学, (3):1-9. http://www.cnki.com.cn/Article/CJFD1983-DQKX198303000.htm 马杏垣, 2004.解析构造学.北京:地质出版社, 10-18. 钱学森, 2007.创建系统学.上海:上海交通大学出版社. 谭以安, 李东旭, 1987.麻花状S型褶皱及其模拟实验:以铜官山背斜为例.现代地质, 1(1):114-122. http://www.cnki.com.cn/Article/CJFDTotal-XDDZ198701009.htm 杨森楠, 杨巍然, 1985.中国区域大地构造学.北京:地质出版社, 106. 朱志澄, 1999.构造地质学.武汉:中国地质大学出版社, 81-126, 128-141. -
点击查看大图
计量
- 文章访问数: 5036
- HTML全文浏览量: 2101
- PDF下载量: 55
- 被引次数: 0
