Honda CB1000R 2022 Owner's Manual
Hide thumbs
Table of Contents
Advertisement
Owner's Manual
2022
2022
CB1000RA
Advertisement
Chapters
Table of Contents
Related Manuals for Honda CB1000R 2022
Summary of Contents for Honda CB1000R 2022
- Page 1 Owner’s Manual 2022 2022 CB1000RA...
- Page 2 This publication includes the latest production information available before printing. Honda Motor Co., Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.
- Page 3 Welcome Congratulations on your purchase of a new When service is required, remember that Honda vehicle. Your selection of a Honda your Honda dealer knows your vehicle best. makes you part of a worldwide family of If you have the required mechanical “know- satisfied customers who appreciate Honda's how”...
- Page 4 A Few Words About Safety DANGER Your safety, and the safety of others, is very important. Operating this vehicle safely is an You WILL be KILLED or SERIOUSLY important responsibility. HURT if you don’t follow instructions. To help you make informed decisions about safety, we have provided operating WARNING procedures and other information on safety...
-
Page 5: Table Of Contents
Contents Vehicle Safety P. 2 Operation Guide P. 16 Maintenance P. 92 Troubleshooting P. 137 Information P. 150 Specifications P. 179... -
Page 6: Vehicle Safety
Vehicle Safety This section contains important information for safe riding of your vehicle. Please read this section carefully. Safety Guidelines ..........P. 3 Safety Labels............P. 7 Safety Precautions..........P. 9 Riding Precautions ..........P. 10 Accessories & Modifications......P. 14 Loading .............. -
Page 7: Safety Guidelines
Safety Guidelines Safety Guidelines Before Riding Make sure that you are physically fit, mentally Follow these guidelines to enhance your safety: focused and free of alcohol and drugs. Check Perform all routine and regular inspections ● that you and your passenger are both wearing specified in this manual. - Page 8 Safety Guidelines We recommend that all riders take a certified Make Yourself Easy to See course approved by the Motorcycle Safety Make yourself more visible, especially at night, Foundation (MSF) or a state approved training by wearing bright reflective clothing, positioning course.
- Page 9 If you decide to continue riding, first turn the Keep Your Honda in Safe Condition ignition switch to the OFF position, and evaluate It's important to keep your vehicle properly the condition of your vehicle. Inspect for fluid maintained and in safe riding condition.
- Page 10 Safety Guidelines WARNING Carbon Monoxide Hazard Exhaust contains poisonous carbon monoxide, a Running the engine of your vehicle colorless, odorless gas. Breathing carbon while in an enclosed or even partially monoxide can cause loss of consciousness and enclosed area can cause a rapid build- may lead to death.
-
Page 11: Safety Labels
Safety Labels Safety Labels serious injury. Read these labels carefully and don't remove them. Safety and information labels on your vehicle If a label comes off or becomes hard to read, provide important safety information and may contact your dealer for a replacement. warn you of potential hazards that could cause Continued... - Page 12 Safety Labels...
-
Page 13: Safety Precautions
Safety Precautions Safety Precautions Must fit comfortably but securely, with the ● chin strap fastened. Ride cautiously and keep your hands on the Face shield with unobstructed field of vision ● ● handlebar and feet on the footpegs. or other approved eye protection Keep passenger's hands onto the seat strap Look for a DOT (Department of ●... -
Page 14: Riding Precautions
Riding Precautions Riding Precautions Boots or Riding Shoes Sturdy boots with non-slip soles and ankle protection Break-in Period Jacket and Pants During the first 300 miles (500 km) of running, follow these guidelines to ensure your vehicle's Protective, highly visible, long-sleeved jacket future reliability and performance. - Page 15 Riding Precautions Exercise caution on low traction surfaces. The brake lever and pedal may recoil slightly ● ● The tires slip more easily on such when applying the brakes. This is normal. surfaces and braking distances are Always use the recommended front/rear ●...
- Page 16 Riding Precautions Turn the handlebar fully to the left. Parking Turning the handlebar to the right Park on a firm, level surface. ● reduces stability and may cause the If you must park on a slight incline or loose ● vehicle to fall.
- Page 17 Torque Control may not compensate for rough Honda selectable torque control road conditions or rapid throttle operation. When the Honda selectable torque control Always consider road and weather conditions, (Torque Control) detects rear wheel spin during as well as your skills and condition, when acceleration, the system will limit the amount of applying throttle.
-
Page 18: Accessories & Modifications
We strongly advise that you do not add any seriously hurt or killed. accessories that were not specifically designed or approved for your vehicle by Honda or make Follow all instructions in this owner's modifications to your vehicle from its original manual regarding accessories and design. -
Page 19: Loading
Loading Loading WARNING Overloading or improper loading can Carrying extra weight affects your vehicle's ● cause a crash and you can be seriously handling, braking and stability. hurt or killed. Always ride at a safe speed for the load you are carrying. - Page 20 Parts Location Tool kit (P.90) Document bag (P.91) Main fuse/ABS fuse (P.149) Fuse box (P.148) Battery (P.113) Front brake fluid reservoir (P.121) Front suspension spring preload adjuster (P.132) Front brake lever (P.131) Rear brake fluid reservoir (P.121) Engine oil level inspection window (P.117) Engine oil fill cap...
- Page 21 Front suspension rebound damping/compression damping adjuster (P.133) (P.134) Fuel fill cap (P.87) Throttle grip (P.130) Front seat (P.114) Rear seat (P.115) Clutch lever (P.127) Coolant reserve tank (P.119) Rear suspension spring preload adjuster (P.135) Drive chain (P.125) Side stand (P.124) Shift lever (P.85)
- Page 22 Instruments You can change the speed and mileage, and fuel mileage meter units. (P.40) (P.55) Do not operate the display functions for a long time with the engine stopped. It may result in a low (or dead) battery.
- Page 23 Status bar (P.25) (P.23) RIDING MODE (P.77) RIDING MODE PARAMETER (P.77) This feature is not available in the USA and Canada Honda Smartphone Voice Control system area (P.73) Quick Shifter indicator (P.24) INFO area Gear position indicator (P.26) (P.24) Pop-up information (P.64)
- Page 24 Instruments (Continued) Basic Operations You can operate and set the various functions of the display using the switches on the left handlebar. Function switch Sel switch When switching or setting the display, refer to the switch operation guide displayed. Switch operation guide: : Press on the sel switch : Press...
- Page 25 Speedometer/Tachometer/Fuel gauge/Side stand indicator area Display type: TYPE 1 Side stand indicator Tachometer red zone Comes on when the side stand is down. (excessive engine rpm range) Fuel gauge Remaining fuel when only 1st (E) segment starts flashing: approximately 0.92 US gal (3.5 L) At the same time, the reserve fuel indicator comes on.
- Page 26 Instruments (Continued) Speedometer/Tachometer/Fuel gauge/Side stand indicator area has four display types. The display and arrangement of the speedometer, tachometer and fuel gauge change depending on each display type. To change the display type: (P.40) (P.49) Display type: TYPE 4 Display type: TYPE 2 Display type: TYPE 3 Tachometer Side stand indicator...
- Page 27 Status bar Status icon This feature is not available in the USA and Canada Clock (12-hour or 24-hour display) Displays the status of the Honda To set the clock: (P.40) (P.54) Smartphone Voice Control system. (P.73) Coolant temperature gauge Displays the coolant temperature.
- Page 28 Instruments (Continued) Gear position indicator The gear position is shown in the gear position indicator. “-” appears when the transmission is not shifted properly. Quick Shifter indicator Displays the current status of the Quick Shifter. This indicator is displayed in the gear position indicator. No display : Quick Shifter system is disabled.
- Page 29 Indicator area High beam indicator High coolant temperature indicator If it comes on while riding: (P.139) Low oil pressure indicator Comes on when the electrical system is turned on. Goes off when the engine starts. If it comes on while engine is running: (P.140) Low fuel indicator Comes on when there is only reserve fuel...
- Page 30 Instruments (Continued) INFO area To switch page of the INFO area The INFO area displays various vehicle To change page of the INFO area, push the information. sel switch in the direction of INFO page 1 The INFO area has four pages and displays four pieces of information on each page.
- Page 31 The types of information item that can be VOLTAGE (P.34) displayed in the INFO area are as follows: DATE (P.34) TOTAL (P.28) User letter (P.34) TRIP A (P.28) Logo (P.34) TRIP A CONS. (P.29) SHIFT POINT (P.35) TRIP A AVG. CONS. (P.29) FUEL CONS.
- Page 32 Instruments (Continued) Odometer [TOTAL] Tripmeter A [TRIP A] Total distance ridden. Distance ridden since the tripmeter A was reset. When “------” is displayed, go to your dealer for service. When “----.-” is displayed, go to your dealer for service. To reset the tripmeter A: (P.39)
- Page 33 Tripmeter A fuel consumption [TRIP A Tripmeter A average fuel mileage CONS.] [TRIP A AVG. CONS.] Displays the tripmeter A fuel consumption Displays the average fuel mileage since the since the tripmeter A was reset. tripmeter A was reset. Display range: 0.0 to 299.9 GAL (L) The average fuel mileage will be calculated based on the value on tripmeter A.
- Page 34 Instruments (Continued) Tripmeter B [TRIP B] Tripmeter B fuel consumption [TRIP B CONS.] Distance ridden since the tripmeter B was reset. Displays the tripmeter B fuel consumption since the tripmeter B was reset. Display range: 0.0 to 299.9 GAL (L) When “----.-”...
- Page 35 Tripmeter B average fuel mileage Current fuel mileage [INST. CONS.] [TRIP B AVG. CONS.] Displays the current instant fuel mileage. Displays the average fuel mileage since the Display range: 0.0 to 299.9 mile/GAL (mile/L, tripmeter B was reset. km/L or L/100 km) The average fuel mileage will be calculated When your speed is less than 3 mph (5 ●...
- Page 36 Instruments (Continued) Average fuel mileage [AVG. CONS.] Average speed [AVG. SPEED] Displays the average fuel mileage since the Displays the average speed since the average average fuel mileage was reset. speed was reset. Display range: 0.0 to 299.9 mile/GAL (mile/L, Display range: 0 to 186 mph (0 to 299 km/h) km/L or L/100 km) Initial display: “---”...
- Page 37 Elapsed time [ELAPSED] Numerical tachometer display [REV] Displays the engine operating time since the Displays the engine revolutions per minute. elapsed time was reset. Display range: 00:00 to 99:59 (hours:minutes) Above 99:59: back to 00:00 ● Throttle grip angle [GRIP ANGLE] Displays the throttle grip angle during operation.
- Page 38 Instruments (Continued) Battery voltage [VOLTAGE] User letter Displays the current voltage. The user may choose what characters are displayed. Date [DATE] To set the USER LETTER: (P.40) Displays today's date. (P.53) Logo Displays the CB1000R logo. To set the date: (P.40) (P.54)
- Page 39 SHIFT POINT set value [SHIFT POINT] Fuel consumption in this time [FUEL CONS. Displays the SHIFT POINT set value. Display range: 5,000 - 11,400 r/min Displays the fuel consumption since the electrical system was turned on. Display range: 0.0 to 50.0 GAL (L) Initial display: “--.-”...
- Page 40 Instruments (Continued) Average fuel mileage in this time Average speed in this time [AVG. [AVG. CONS. SPEED Displays the average fuel mileage since the Displays the average speed since the electrical system was turned on. electrical system was turned on. Display range: 0.0 to 299.9 mile/GAL (mile/L, Display range: 0 to 186 mph (0 to 299 km/h) km/L, or L/100 km)
- Page 41 Elapsed time in this time [ELAPSED Reserve tripmeter [RES TRIP] Distance ridden since the reserve fuel Displays the engine operating time since the indicator light turned on. electrical system was turned on. Display range: 0.0 to 9999.9 mile (km) Display range: 00:00 to 99:59 (hours:minutes) Above 9999.9: back to 0.0.
- Page 42 Instruments (Continued) Reserve fuel consumption [RES FUEL Blank display CONS.] Display is blank. Displays the fuel consumption since the reserve fuel indicator light turned on. Display range: 0.0 to 299.9 GAL (L) When the reserve fuel indicator is off: ● "---.-"...
- Page 43 Also, the tripmeter A, tripmeter A fuel To Reset the Information consumption and tripmeter A average fuel Select the page in the INFO area that mileage are automatically reset when only contains the item you want to reset with the reserve fuel remains in the fuel tank (the of the sel switch.
- Page 44 Instruments (Continued) Setting mode To shift to the setting mode Push and hold the sel switch in the direction of To select the desired setting menu, operate the sel switch on the left handlebar. When switching to the setting mode, the clock, indicators and speed are displayed at the top of the screen.
- Page 45 Setting flow Ordinary display Setting mode RIDING MODE (P.70) QUICK SHIFTER (P.46) SHIFT POINT (P.47) FUNCTION SELF-CANCELLING TURN (P.48) SIGNALS TRIP A AUTO RESET (P.48) DISPLAY Push/Press Push and hold/Press and hold Continued...
- Page 46 Instruments (Continued) FUNCTION DISPLAY TYPE (P.49) BRIGHTNESS (P.50) DISPLAY BACKGROUND (P.51) FAVORITE INFORMATION (P.52) USER LETTER (P.53) GENERAL Push/Press Push and hold/Press and hold...
- Page 47 DISPLAY DATE & TIME (P.54) UNIT (P.55) GENERAL LANGUAGE (P.56) RESTORE DEFAULT (P.57) BLUETOOTH PAIRING RESET (P.58) SERVICE *This feature is not available in the USA and Canada Push/Press Push and hold/Press and hold Continued...
- Page 48 Instruments (Continued) GENERAL MAINTENANCE (P.59) SERVICE EQUIPMENT (P.62) QS INITIALIZE (P.62) (P.63) REGULATORY (P.63) Push/Press Push and hold/Press and hold...
- Page 49 To return to the default settings: RIDING MODE (P.77) Push and hold the sel switch in the direction You can change the setting value of the USER MODE. Reset the setting according to the switch operation guide. (P.20) Select the parameter ("P", "EB" or "T" ) using of the sel switch.
- Page 50 Instruments (Continued) Select the "UP" or "DOWN" using the QUICK SHIFTER up or sel down switch. You can change the settings of the Quick Select to the desired setting according to Shifter. the switch operation guide. (P.20) UP: Change the setting for upshifting. Return to the ordinary display to complete DOWN: Change the setting for downshifting.
- Page 51 Select the "ON/OFF" or "SHIFT POINT" using SHIFT POINT of the sel switch. ON/OFF : You can activate or deactivate Select to the desired setting according to the shift up mode. the switch operation guide. (P.20) SHIFT POINT : You can change the engine Return to the ordinary display to complete revolutions at which the the setting.
- Page 52 Instruments (Continued) SELF-CANCELLING TURN SIGNALS TRIP A AUTO RESET You can enable or disable turn signal You can enable or disable the tripmeter A automatic cancellation. automatic reset mode. (P.70) (P.39) Select the "ON" or "OFF" using Select the "ON" or "OFF" using the sel switch.
- Page 53 DISPLAY TYPE You can change the display type of the speedometer / tachometer / fuel gauge. (P.21) Select the display type ("TYPE 1", "TYPE 2" "TYPE 3" or "TYPE 4") using of the sel switch. Return to the ordinary display to complete the setting.
- Page 54 Instruments (Continued) BRIGHTNESS You can adjust the backlight brightness to one of the eight levels or select the auto adjustment. Automatic brightness control: (P.156) The display can become dark when the display is very hot. If it does not restore to its original brightness, contact your dealer.
- Page 55 BACKGROUND You can change the setting of the background to one of the three colors or select the auto adjustment. Automatic Background Control: (P.156) Select the background color using of the sel switch. Return to the ordinary display to complete the setting.
- Page 56 Instruments (Continued) FAVORITE INFORMATION You can change the information items displayed in the INFO area. (P.26) Select the page of the INFO area ("INFO1", "INFO2", "INFO3" or "INFO4") using of the sel switch. Select the desired setting according to the switch operation guide.
- Page 57 USER LETTER You can edit the USER LETTER with up to 10 characters. Edit the USER LETTER. To select the character using the sel switch. To set the character using the function switch. Select the "OK", and then press the function switch.
- Page 58 Instruments (Continued) DATE & TIME Select the "24h or 12h", "YEAR", "MONTH - DAY", "HOUR - MINUTE" or "am / pm" using of the sel switch. Select the desired setting according to the switch operation guide. (P.20) When "24 / 12" is set to 24-hour indication, "am / pm"...
- Page 59 UNIT You can change the speed, mileage, and fuel mileage meter units. Select the "SPEED" or "TEMP" or "FUEL CONS." using of the sel switch. Select the desired setting according to the switch operation guide. (P.20) Return to the ordinary display to complete the setting.
- Page 60 Instruments (Continued) LANGUAGE Changes the system language. Select the language using of the sel switch. Return to the ordinary display to complete the setting. (P.40) To continue setting, push the sel switch in the direction of to return to the upper hierarchy.
-
Page 61: Operation Guide
The following items are restored to their RESTORE DEFAULT default values: The set values can be returned to the default • DISPLAY TYPE settings. • SHIFT POINT Reset the settings according to the switch • BRIGHTNESS operation guide. • BACKGROUND (P.20) •... - Page 62 Instruments (Continued) BLUETOOTH PAIRING RESET This feature is not available in the USA and Canada You can reset the Bluetooth pairing record. ® To connect the device (P.73) Reset the settings according to the switch operation guide. (P.20) If the pairing information remains in your smartphone even if the pairing information is deleted from the vehicle, the smartphone may be connected to the vehicle again.
- Page 63 Display range: MAINTENANCE DISTANCE: You can check the next periodic inspection Next periodic inspection: time and next engine oil change. -----, 4,000 to -99,999 mile (-----, 6,400 You can change the setting of the next to -99,999 km) periodic inspection and next engine oil Next engine oil change: change.
- Page 64 Instruments (Continued) When reaching any of the following, the pop-up information appears in the ordinary display. (P.64) “300 mile” (“500 km”) from the next ● periodic inspection. “60 mile” (“100 km”) from the next engine ● oil change. One month before the set month. ●...
- Page 65 Next inspection setting Select the desired setting according to the Select “ ” (periodic inspection) or “ ” switch operation guide. (engine oil change) using of the If you press and hold of the sel sel switch. switch while setting the “DISTANCE”, it will move every 1000.
- Page 66 Instruments (Continued) EQUIPMENT QS INITIALIZE "EQUIPMENT" is displayed but not selectable. "QS INITIALIZE" is displayed but not selectable.
- Page 67 REGULATORY Displays a current problem with the vehicle. Displays the radio wave authentication If your vehicle has problem, DTC index is screen. displayed. Reduce speed and have your vehicle inspected by your dealer as soon as possible. DTC indexes Continued...
- Page 68 Instruments (Continued) Pop-up information In the following cases, pop-up information is displayed in the INFO area. Maintenance information: ● When the inspection time of your vehicle is approaching. When your vehicle has multiple pieces of information to display, the pop-up information display will alternate between them.
- Page 69 Tachometer color function Shift Up Mode When shift up mode is ON, the tachometer color changes according to the shift point setting. To set the shift up mode (P.40) (P.47) The tachometer blinks yellow when the engine revolutions exceed the set value of SHIFT POINT.
- Page 70 Indicators If one of these indicators does not come on when it should, have your dealer check for problems. Refer to the "Instruments" about indicators appearing on the display: (P.25) Left turn signal indicator Right turn signal indicator Neutral indicator Comes on when the transmission is in Neutral.
- Page 71 Torque Control indicator Comes on when the electrical system is ● turned on. Goes off when your speed reaches approximately 3 mph (5 km/h) to indicate Torque Control is ready to work. Blinks when Torque Control is operating. ● If it comes on while riding: (P.142) Torque Control OFF Indicator Comes on when the Torque Control is...
- Page 72 Switches Engine stop switch/ Start button Left handlebar switch (P.70) Should normally remain in the (Run) position. In an emergency, switch to the (Stop) position to stop the engine.
- Page 73 Ignition Switch Switches the electrical system on/off, locks Turns electrical system the steering. on for starting/riding. Key can be removed when in the OFF or LOCK position. Turns engine off. LOCK Locks steering. Continued...
- Page 74 Switches (Continued) Left handlebar switches Headlight dimmer/Passing light control switch • : High beam • : Low beam • : Flashes the high beam headlight. switch MODE Used to change the riding mode. (P.20) Horn button Turn signal switch The turn signal will automatically stop when you complete the turn. (You can manually cancel the lights by pressing the switch in.) When used for a lane change, the turn signal will automatically stop in about 7 seconds or after riding 164 yards (150 m).
- Page 75 (P.20) Also used to set the riding mode and to (P.77) operate the Honda Smartphone Voice Control system This feature is not available in the USA and Canada (P.73) Hazard switch Switchable when the electrical system is on. Can be turned off regardless of whether the electrical system is on or off.
- Page 76 Switches (Continued) Steering Lock Locking Turn the handlebar all the way to the left. Lock the steering when parking to help Push the key down, and turn the ignition prevent theft. switch to the LOCK position. A U-shaped wheel lock or similar device is Jiggle the handlebar if the lock is difficult also recommended.
- Page 77 Honda Smartphone Voice Control system For terms of service and information on how This feature is not available in the USA and Canada Connecting your smartphone with the vehicle to install/operate the dedicated application, and a Bluetooth headset via Bluetooth see the following URL: ®...
- Page 78 The Bluetooth word mark and logos are ® registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
- Page 79 Control system while riding can take services. your attention away from the road, causing a crash in which you could be Honda cannot and does not provide any seriously injured or killed. warranty or guarantee of future Honda Smartphone Voice Control system •...
- Page 80 Honda Smartphone Voice Control system (Continued) After resetting, complete pairing while the Pairing your smartphone via Bluetooth indicator is flashing by operating Bluetooth ® ® the application on your smartphone. Select the BLUETOOTH PAIRING RESET When the display returns to the ordinary menu.
- Page 81 Riding mode You can change the riding mode. Current riding mode P level The riding mode consists of the following (Engine power parameters. output level) P: Engine output level T: Torque control level EB: Engine brake level EB level (Engine brake level) T level (Torque control level) Continued...
- Page 82 Riding mode (Continued) Riding mode has four modes. You cannot change the initial setting levels Available riding modes: [STANDARD], [RAIN], for [STANDARD], [RAIN], and [SPORT]. [USER] and [SPORT] [USER] [STANDARD] : Standard, all-around mode Each initial setting level can be changed. for a variety of situations.
- Page 83 P level (Engine power output level) EB level (Engine brake level) P level has three setting levels. EB level has three setting levels. Available setting range: 1 to 3 Available setting range: 1 to 3 Level 1 has the least power. Level 1 has the weakest engine braking Level 3 has the most power.
- Page 84 Riding mode (Continued) Selecting the riding mode Stop the vehicle. STANDARD Press the switch with the throttle MODE fully closed. RAIN switch MODE USER SPORT Press the switch MODE...
- Page 85 Setting the riding mode Press and hold the switch until the MODE parameter stops flashing. You can change the P, EB, and T levels on the USER riding mode. You can also change the levels on the USER riding mode in the setting mode of the Stop the vehicle.
- Page 86 Riding mode (Continued) Press and hold the switch MODE Push the sel switch in the direction of Push the sel switch in the direction of Press on the sel switch Press on the sel switch Press and hold on the sel switch...
- Page 87 Starting the Engine Start your engine using the following NOTICE procedure, regardless of whether the engine • If the engine does not start within 5 seconds, is cold or warm. turn the ignition switch to the OFF position and wait 10 seconds before trying to start the engine again to recover battery voltage.
- Page 88 Starting the Engine (Continued) Press the start button with the throttle If the engine does not start: completely closed. Open the throttle fully and press the start If you cannot start the engine, open the button for 5 seconds. throttle slightly (about 1/8 in [3 mm], Repeat the normal starting procedure.
- Page 89 Shifting Gears Your vehicle transmission has 6 forward Recommended Shift Points gears in a one-down, five-up shift pattern. Shifting Up From 1st to 2nd 12 mph (20 km/h) From 2nd to 3rd 19 mph (30 km/h) From 3rd to 4th 25 mph (40 km/h) From 4th to 5th 31 mph (50 km/h)
- Page 90 Shifting Gears (Continued) Quick Shifter The Quick Shifter can be individually ● This system enables very quick up and down turned ON (active) and OFF (deactivate). shifting without clutch and throttle The shift pedal load level for activating operations. the Quick Shifter can be adjusted during This system does not function when up and downshifting.
- Page 91 Refueling Opening the Fuel Fill Cap Open the lock cover, insert the ignition key, Level plate Lock cover and turn it clockwise to open the cap. Closing the Fuel Fill Cap After refueling, push the fuel fill cap closed until it locks. Remove the key and close the lock cover.
- Page 92 This socket is for battery charge only. USB socket Use USB devices at your own risk. In no event shall Honda be liable for any damage to your USB device when in use. Only USB devices within the following specifications can be connected.
- Page 93 To prevent the battery from becoming weak (or dead), keep the engine running while drawing current from the socket. To prevent entry of foreign matter into the socket, be sure to close the cover. Carefully secure all connected devices, as vibration may cause damage to them or they could shift unexpectedly.
- Page 94 Storage Equipment Helmet Holder WARNING The helmet holder is located under the rear Riding with a helmet attached to the seat. holder can interfere with the rear wheel or A helmet set wire is in the tool kit. suspension and could cause a crash in which you can be seriously hurt or killed.
- Page 95 Document Bag and Luggage Tie-down Hooks The document bag and luggage tie-down hooks are located on the underside of the rear seat. Luggage tie-down hooks Luggage tie-down hooks Document bag Never use the tie-down hooks to tow or lift the vehicle. Removing the rear seat (P.115)
-
Page 96: Maintenance
Please read “Importance of Maintenance” and “Maintenance Fundamentals” carefully before attempting any maintenance. Refer to “Specifications” for service data. An optional larger tool kit may be available. Check with your Honda dealer's parts department. Importance of Maintenance ......P. 93 Drive Chain ............P. 125 Maintenance Schedule........ -
Page 97: Importance Of Maintenance
Importance of Maintenance For information about the exhaust emission and Importance of Maintenance noise emission requirements of the U.S. Keeping your vehicle well-maintained is Environmental Protection Agency (EPA), the absolutely essential to your safety and to California Air Resources Board (CARB), and the protect your investment, obtain maximum Environment and Climate Change Canada performance, avoid breakdowns, and reduce air... - Page 98 Importance of Maintenance Follow these guidelines when performing Maintenance Safety maintenance. Always read the maintenance instructions Stop the engine and remove the key. ● before you begin each task and make sure that Place your vehicle on a firm, level surface ●...
-
Page 99: Maintenance Schedule
Maintenance work should be performed in owner. accordance with Honda's standards and specifications by properly trained and equipped technicians. Your dealer meets all of these requirements. All scheduled maintenance is considered a normal owner operating cost and will be charged to you by your dealer. - Page 100 Inspect (clean, adjust, lubricate, or replace, if necessary) unless you have the necessary tools and are Replace mechanically skilled. Lubricate Procedures are provided in an official Honda Service Clean Manual (2 P. 171). : Technical. In the interest of safety, have your vehicle serviced by your dealer.
- Page 101 Maintenance Schedule Frequency Items × 1,000 mi Regular Refer to Replace page × 1,000 km 12.8 19.2 25.6 32.0 38.4 Drive Chain Every 600 mi (1,000 km): Brake Fluid 2 Years Brake Pads Wear Brake System Brake Light Switch Headlight Aim –...
-
Page 102: Maintenance Record
Maintenance Record Distance Odometer Date Performed By: Notes 600 miles (1,000 km) 4,000 miles (6,400 km) 8,000 miles (12,800 km) 12,000 miles (19,200 km) 16,000 miles (25,600 km) 20,000 miles (32,000 km) 24,000 miles (38,400 km) 28,000 miles (44,800 km) 32,000 miles (51,200 km) 36,000 miles (57,600 km) 40,000 miles (64,000 km) -
Page 103: Maintenance Fundamentals
Maintenance Fundamentals Suspension is adjusted to suit load P. 132 Pre-ride Inspection ● P. 135 To ensure safety, it is your responsibility to Check the following items after you get on your perform a pre-ride inspection and make sure vehicle: that any problem you find is corrected. - Page 104 Maintenance Fundamentals Periodic Checks You should also perform other periodic maintenance checks at least once a month regardless of how often you ride, or more often if you ride frequently. Also, check the odometer reading against the Maintenance Schedule and perform all maintenance that is due.
- Page 105 Maintenance Fundamentals WARNING Replacing Parts Always use Honda Genuine Parts or their Installing non-Honda parts may make equivalents to ensure reliability and safety. your vehicle unsafe and cause a crash in When ordering colored components, specify which you can be seriously hurt or the model name, color, and code mentioned on killed.
- Page 106 Maintenance Fundamentals Electrolyte splashes onto your skin: Battery ● Remove affected clothing and wash your Your vehicle has a maintenance-free type skin thoroughly using water. battery. You do not have to check the battery Electrolyte splashes into your mouth: ● electrolyte level or add distilled water.
- Page 107 30 days using a charger designed specifically for If the terminals are heavily corroded, clean your Honda, which can be purchased from your and polish the terminals with a wire brush or dealer. Read the information that came with sandpaper.
- Page 108 Bump starting is also not Blown fuse recommended. NOTICE Installing non-Honda electrical accessories can overload the electrical system, discharging the battery and possibly damaging the system. NOTICE Replacing a fuse with one that has a higher...
- Page 109 For recommended engine oil, see or “Resource Conserving” on the circular API “Specifications.” P. 180 service symbol. If you use non-Honda engine oil, check the label to make sure that the oil satisfies all of the following standards: JASO T 903 standard : MA ●...
- Page 110 Wipe up spills immediately and wash thoroughly. chain inspected by your dealer. Recommended brake fluid: Also inspect the drive sprocket and driven Honda DOT 4 Brake Fluid or equivalent sprocket. If either has worn or damaged teeth, WARNING have the sprocket replaced by your dealer.
- Page 111 O-ring chains, or neutral spray onto your clothes and the vehicle. detergent. Use a soft brush if the chain is dirty. After cleaning, wipe dry and lubricate with the recommended lubricant. Recommended lubricant: Pro Honda HP Chain Lube or equivalent...
- Page 112 Maintenance Fundamentals Recommended Coolant Crankcase Breathers Pro Honda HP Coolant is a pre-mixed solution Service more frequently when riding in rain, at of antifreeze and distilled water. full throttle, or after the vehicle is washed or overturned. Service if the deposit level can be...
- Page 113 Maintenance Fundamentals Inspecting for Damage Tires (Inspecting/Replacing) Checking the Air Pressure Inspect the tires for Visually inspect your tires and use an air cuts, slits, or cracks that pressure gauge to measure the air pressure at expose fabric or cords, least once a month or any time you think the or nails or other tires look low.
- Page 114 Maintenance Fundamentals WARNING Inspecting Tread Depth Inspect the tread wear indicators. If they Riding on tires that are excessively worn become visible, replace the tires immediately. or improperly inflated can cause a crash For safe riding, you should replace the tires in which you can be seriously hurt or when the minimum tread depth is reached.
- Page 115 Always use the size and type of tires and load range. recommended in this owner's manual. Have the wheel balanced with Honda ● Genuine balance weights or equivalent after the tire is installed.
- Page 116 Maintenance Fundamentals Tire Identification Number (TIN) Tire Service Life The tire identification number (TIN) is a group The service life of your tires is dependent on of numbers and letters located on the sidewall many factors, including, but not limited to, of the tire.
-
Page 117: Removing & Installing Body Components
Removing & Installing Body Components Battery Removal Make sure the ignition switch is in the OFF position. Positive terminal Negative terminal Remove the front seat. P. 114 Battery Unhook the rubber strap from right side. Disconnect the negative - terminal from the battery. -
Page 118: Front Seat
Removing & Installing Body Components Front Seat Front Seat Removal Remove the rear seat. P. 115 Mounting bolts Remove the mounting bolts and washers, and then pull the front seat back and up. Washer Installation Install the front seat while inserting the Washer tab into the recess. -
Page 119: Rear Seat
Removing & Installing Body Components Rear Seat Rear Seat Removal Insert the ignition key into the seat lock. Turn the ignition key clockwise, then pull Rear seat Tabs the rear seat up and back. Installation Insert the tabs into the recess. Push down on the rear of the rear seat. -
Page 120: Single Seat Cowl
Removing & Installing Body Components Single Seat Cowl Single Seat Cowl Removal Insert the ignition key into the seat lock. Single seat cowl Turn the ignition key clockwise, then pull Tabs the single seat cowl up and back. Installation Insert the tabs into the recess. Push down on the rear of the single seat Ignition key cowl. -
Page 121: Engine Oil
Engine Oil Checking the Engine Oil Oil fill cap Oil level inspection If the engine is cold, idle the engine for 3 window to 5 minutes. Turn the ignition switch to the OFF Upper level position and wait for 2 to 3 minutes. Place your vehicle in an upright position on a firm, level surface. - Page 122 Engine Oil Adding Engine Oil Adding Engine Oil Securely reinstall the oil fill cap. NOTICE If the engine oil is below or near the lower Overfilling with oil or operating with insufficient level mark, add the recommended engine oil. oil can cause damage to your engine. Do not mix P.
-
Page 123: Coolant
Coolant Checking the Coolant Reserve tank cap UPPER level Check the coolant level in the reserve tank while the engine is cold. Place your vehicle on a firm, level surface. Hold your vehicle in an upright position. Check that the coolant level is between the UPPER level and LOWER level marks on the reserve tank. - Page 124 Coolant Adding Coolant Adding Coolant WARNING Removing the radiator cap while the If the coolant level is below the LOWER level engine is hot can cause the coolant to mark, add the recommended coolant spray out, potentially scalding you. P. 108) until the level reaches the UPPER level mark.
-
Page 125: Brakes
Brakes Checking Brake Fluid If the brake fluid level in either reservoir is below the LWR mark or LOWER level mark or the brake lever and pedal freeplay becomes Place your vehicle in an upright position excessive, inspect the brake pads for wear. on a firm, level surface. - Page 126 Brakes Inspecting the Brake Pads Inspecting the Brake Pads Inspect the brake pads from in front Front of the brake caliper. Always inspect both left and right Check the condition of the brake pad wear brake calipers. indicators. Inspect the brake pads from the Rear The pads need to be replaced if a brake pad right side of the rear tire.
- Page 127 Brakes Adjusting the Brake Light Switch Adjusting the Brake Light Switch Check the operation of the brake light switch. Hold the brake light switch and turn the adjusting nut in the direction A if the switch operates too late, or turn the nut in the direction B if the switch operates too soon.
-
Page 128: Side Stand
Side Stand Checking the Side Stand Start the engine, pull the clutch lever in, and shift the transmission into gear. Lower the side stand all the way. The engine should stop as you lower the side stand. If the engine doesn't stop, have your vehicle inspected by your dealer. -
Page 129: Drive Chain
Drive Chain Inspecting the Drive Chain Check the slack in the lower half of the drive chain midway between the Slack sprockets. Push the lower part of the drive chain Check the drive chain slack at several points down and check the chain slack along the chain. - Page 130 Drive Chain Inspecting the Drive Chain Slack Roll the vehicle forward and check that Swingarm Drive chain the chain moves smoothly. Inspect the sprockets. P. 106 Clean and lubricate the drive chain. P. 107 Push Drive chain slack...
-
Page 131: Clutch
Clutch Checking the Clutch Check the clutch cable for kinks or signs of wear. If necessary, have it replaced by your Checking the Clutch Lever Freeplay dealer. Lubricate the clutch cable with a Check the clutch lever freeplay. commercially available cable lubricant to Freeplay at the clutch lever: prevent premature wear and corrosion. - Page 132 Clutch Adjusting the Clutch Lever Freeplay Adjusting the Clutch Lever Upper clutch cable adjuster Freeplay Upper Adjustment Attempt adjustment with the upper clutch cable adjuster first. Turn the clutch cable adjuster until the freeplay is 3/8 - 13/16 in (10 - 20 mm).
- Page 133 Clutch Adjusting the Clutch Lever Freeplay Lower Adjustment Adjusting nut Lower lock nut If the upper clutch cable adjuster is threaded out near its limit, or the correct freeplay cannot be obtained, attempt adjustment with the lower clutch cable adjusting nut. Turn the upper clutch cable adjuster all the way in (to provide maximum freeplay).
-
Page 134: Throttle
Throttle Checking the Throttle With the engine off, check that the throttle rotates smoothly from fully closed to fully open. If the throttle does not move smoothly, or does not close automatically, have the vehicle inspected by your dealer. Throttle... -
Page 135: Other Adjustments
Other Adjustments Adjusting the Brake Lever Index mark You can adjust the distance between the tip of the brake lever and handle grip. Adjuster Adjustment method Turn the adjuster until the numbers align with Forward the index mark while pushing the lever forward in the desired position. -
Page 136: Adjusting The Front Suspension
Other Adjustments Adjusting the Front Suspension Adjusting the Front Suspension Adjuster Spring Preload You can adjust the spring preload by the adjuster to suit the load or the road surface. Turn the adjuster using a 6 mm Hex wrench. The spring preload adjuster has 20 turns from the full soft position. - Page 137 Other Adjustments Adjusting the Front Suspension Rebound Damping TEN adjuster You can adjust the rebound damping by the TEN adjuster to suit the load or the road surface. The TEN adjuster has 5 1/2 turns from the full hard position. Turn clockwise to increase rebound damping (hard), or turn counterclockwise to decrease rebound damping (soft).
- Page 138 Other Adjustments Adjusting the Front Suspension Compression Damping COM adjuster You can adjust the compression damping by the COM adjuster to suit the load or the road surface. The COM adjuster has 7 turns from the full hard position. Turn clockwise to increase compression damping (hard), or turn counterclockwise to decrease compression damping (soft).
-
Page 139: Adjusting The Rear Suspension
Other Adjustments Adjusting the Rear Suspension Adjusting the Rear Suspension Pin spanner 1 2 3 4 5 6 7 Adjusting the suspension requires a pin spanner. We recommend that you have your vehicle serviced by your dealer. Spring Preload You can adjust the spring preload by the adjuster to suit the load or the road surface. - Page 140 Other Adjustments Adjusting the Rear Suspension Rebound Damping Reference You can adjust the rebound damping by the punch adjuster to suit the load or the road surface. mark The adjuster has 3 turns from the full hard position. Punch mark Turn clockwise to increase rebound damping Adjuster (hard), or turn counterclockwise to decrease...
-
Page 141: Troubleshooting
Troubleshooting Engine Will Not Start........P. 138 Battery Goes Dead..........P. 147 Overheating (High coolant temperature Burned-out Light Bulb ........P. 147 indicator is on) ..........P. 139 Blown Fuse............P. 148 Warning Indicators On or Flashing..... P. 140 Low Oil Pressure Indicator ......P. 140 PGM-FI (Programmed Fuel Injection) Malfunction Indicator Lamp (MIL).... -
Page 142: Engine Will Not Start
Engine Will Not Start Starter Motor Operates But Starter Motor Does Not Engine Does Not Start Operate Check the following items: Check the following items: Check the correct engine starting Check the correct engine starting ● ● sequence. P. 83 sequence. -
Page 143: Overheating (High Coolant Temperature Indicator Is On)
Overheating (High coolant temperature indicator is on) The engine is overheating when the following Check that the radiator fan is operating, occurs: and then turn the ignition switch to the High coolant temperature indicator OFF position. ● comes on. If the fan is not operating: Suspect a fault. -
Page 144: Warning Indicators On Or Flashing
Warning Indicators On or Flashing Low Oil Pressure Indicator If the engine oil level goes down rapidly, your vehicle may have a leak or another serious problem. Have your vehicle inspected by If the low oil pressure indicator comes on, your dealer. -
Page 145: Abs (Anti-Lock Brake System) Indicator
Warning Indicators On or Flashing ABS (Anti-lock Brake System) Indicator ABS (Anti-lock Brake System) If the ABS indicator stays on, your brakes will continue to work as a conventional system, Indicator but without the anti-locking function. If the indicator operates in one of the The ABS indicator may flash if you turn the following ways, you may have a serious rear wheel while the rear wheel is lifted off... -
Page 146: Torque Control Indicator
Warning Indicators On or Flashing Torque Control Indicator Torque Control Indicator The Torque Control indicator may come on if you rotate the rear wheel while your vehicle is lifted off the ground. In this case, turn the If the indicator operates in one of the ignition switch to the OFF position, and then following ways, you may have a serious to the ON position again. -
Page 147: Other Warning Indications
Other Warning Indications Fuel Gauge Failure Indication If the fuel system has an error, the fuel gauge indicators will be displayed as shown in the illustrations. If these occur, see your dealer as soon as possible. -
Page 148: Tire Puncture
Tire Puncture WARNING Repairing a puncture or removing a wheel requires special tools and technical expertise. Riding your vehicle with a temporary We recommend you have this type of service tire repair can be risky. If the temporary performed by your dealer. repair fails, you can crash and be After an emergency repair, always have the seriously injured or killed. -
Page 149: Smartphone Pairing Trouble
Smartphone Pairing Trouble This feature is not available in the USA and Canada Symptom Cause/remedy Some smartphones you use may be incompatible with the vehicle and/or the operable functions may be limited. Check that the vehicle and smartphone are both in pairing mode. P. - Page 150 Smartphone Pairing Trouble Symptom Cause/remedy Depending on the smartphone you use, it may take some time for the vehicle to connect to a smartphone and to start using a dedicated application. The connection may be temporarily disconnected when starting the engine, which is normal and not a malfunction. The smartphone will be reconnected after the engine is started.
-
Page 151: Electrical Trouble
Electrical Trouble Battery Goes Dead Burned-out Light Bulb Charge the battery using a motorcycle All light bulbs on the vehicle are LEDs. If battery charger. there is an LED which is not turned on, see Remove the battery from the vehicle before your dealer for servicing. -
Page 152: Blown Fuse
Electrical Trouble Blown Fuse Blown Fuse Fuse box cover Spare fuses Before handling fuses, see “Inspecting and Replacing Fuses.” P. 104 Fuse Box Fuses Remove the front seat. P. 114 Remove the fuse box cover. Pull the fuses out one by one with the fuse puller in the tool kit and check for a blown fuse. - Page 153 Electrical Trouble Blown Fuse Main Fuse & ABS Fuse Remove the front seat. P. 114 Disconnect the negative - terminal from Starter magnetic switch cover the battery. P. 113 Remove the starter magnetic switch cover. Pull the main fuse and ABS fuse out one by one and check for a blown fuse.
-
Page 154: Information
Vehicle Identification Number..... P. 164 Emission Control Systems ......P. 165 Catalytic Converter ......... P. 169 Oxygenated Fuels..........P. 170 Authorized Manuals ........P. 171 Warranty Coverage and Service ....P. 172 Honda Contacts ..........P. 175 Reporting Safety Defects ......P. 177... -
Page 155: Keys
Keys Keys Ignition key Key tag Ignition Key This vehicle has two ignition keys and a key tag with a key number and a bar code. Store the spare key and the key tag in a safe location. To make a duplicate key, take the spare key and the key tag to your dealer or a locksmith. -
Page 156: Instruments, Controls, & Other Features
Instruments, Controls, & Other Features Instruments, Controls, & Tripmeter Other Features Each tripmeter resets to 0.0 when the trip mileage exceeds 9,999.9. Ignition Switch Leaving the ignition switch in the ON position Document Bag with the engine stopped will drain the battery. The owner’s manual, registration, and insurance Do not turn the key while riding. - Page 157 Instruments, Controls, & Other Features These limits are designed to provide reasonable Honda Smartphone Voice Control protection against harmful interference in a system residential installation. This equipment This feature is not available in the USA and Canada generates, uses and can radiate radio frequency...
- Page 158 Instruments, Controls, & Other Features RF exposure safety (1) l'appareil ne doit pas produire de brouillage, This device complies with the FCC RF exposure limits and has been evaluated in compliance (2) l'utilisateur de l'appareil doit accepter tout with mobile exposure conditions. brouillage radioélectrique subi, même si le The equipment must be installed and operated brouillage est susceptible d'en compromettre le...
- Page 159 Instruments, Controls, & Other Features CAN ICES-003 Assist-slipper Clutch System This Class B digital apparatus complies with The assist-slipper clutch system helps to prevent Canadian ICES-003. the rear tire from locking up when the deceleration of your vehicle produces a strong Les changements ou modifications non engine braking effect.
-
Page 160: Caring For Your Vehicle
The backlight brightness of the meter will be Frequent cleaning and polishing is important to controlled automatically when "Auto" is selected ensure the life of your Honda. A clean vehicle on the backlight brightness setting. makes it easier to spot potential problems. - Page 161 Caring for Your Vehicle Thoroughly rinse your vehicle with plenty of Washing Precautions clean water and dry with a soft, clean cloth. Follow these guidelines when washing: After the vehicle dries, lubricate any moving Do not use high-pressure washers: ● parts.
- Page 162 Caring for Your Vehicle Do not direct water at the air cleaner: Aluminum Components ● Water in the air cleaner can prevent the Aluminum will corrode from contact with dirt, engine from starting. mud, or road salt. Clean aluminum parts Do not direct water near the headlight: ●...
- Page 163 Caring for Your Vehicle Part of Non-Coloring Do not clean the painted parts using the wax including abrasives. The items of below illustration contain part of Do not use stiff brushes, steel wool, or sand non-coloring. paper. To avoid corrosion and discoloration, apply a Do not use strongly acidic or strongly coat of wax not including abrasives.
- Page 164 Caring for Your Vehicle If necessary, remove heat stains by using a Panels commercially available fine texture compound. Follow these guidelines to prevent scratches Then, rinse by the same manner as removing and blemishes: mud or dust. Wash gently using a soft sponge and plenty ●...
-
Page 165: Storing Your Vehicle
Coat chrome pieces with rust-inhibiting oil. For more information about storage, Canada Lubricate the drive chain. P. 106 visit our website at www.honda.ca and look up ● Place your vehicle on a maintenance stand “Storage Tips” under the “Honda Warranty” in ●... -
Page 166: Transporting Your Vehicle
Transporting Your Vehicle Transporting Your Vehicle If your vehicle needs to be transported, it should be carried on a motorcycle trailer or a flatbed truck or trailer that has a loading ramp or lifting platform, and motorcycle tie-down straps. Never try to tow your vehicle with a wheel or wheels on the ground. -
Page 167: You & The Environment
You & the Environment You & the Environment Recycle Wastes Put oil and other toxic wastes in approved Owning and riding a vehicle can be enjoyable, containers and take them to a recycling center. but you must do your part to protect the Call your local or state office of public works or environment. -
Page 168: Vehicle Identification Number
Vehicle Identification Number Vehicle Identification Number The VIN and engine serial number uniquely identify your vehicle and are required in order to register your vehicle. They may also be required when ordering replacement parts. You should record these numbers and keep them in a safe place. -
Page 169: Emission Control Systems
Your vehicle engine emits combustion Compliance with the terms of the byproducts, including carbon monoxide (CO), Distributor's Warranties for Honda Motorcycle oxides of nitrogen (NOx), and hydrocarbons Emission Control Systems is necessary in order (HC). Gasoline evaporation also emits to maintain a valid emissions system warranty. - Page 170 Emission Control Systems Noise Emission Requirements Canada only The Vehicle Emission Control Information label The EPA requires that vehicles built after is also attached to the right side of the frame. January 1, 1983 comply with applicable noise emission standards for one year or 3,730 miles Canada only Vehicle emission control information label (6,000 km) after the time of purchase when...
- Page 171 Emission Control Systems Ignition Timing Control System Crankcase Emissions Control System The ignition timing control system adjusts the The engine is equipped with a closed crankcase ignition timing to reduce the amount of HC, system to prevent discharging crankcase CO, and NOx produced. emissions into the atmosphere.
- Page 172 Emission Control Systems Removal of, or puncturing of any part of the Noise Emission Control System ● intake system. TAMPERING WITH THE NOISE CONTROL Lack of proper maintenance. ● SYSTEM IS PROHIBITED: Removing or disabling any emissions ● U. S. federal law prohibits, and Canadian compliance component, or replacing any provincial laws may prohibit, the following acts compliance component with a noncompliant...
-
Page 173: Catalytic Converter
A defective catalytic converter contributes to air or otherwise not running properly, stop pollution and can impair your engine's riding and turn off the engine. Have your performance. A replacement unit must be an vehicle serviced as soon as possible. original Honda part or equivalent. -
Page 174: Oxygenated Fuels
Oxygenated Fuels Oxygenated Fuels If you accidentally fill your fuel tank with an oxygenated fuel containing higher percentages, Some conventional fuels blended with alcohol you may experience performance problems. To or an ether compound are available in some resolve the problem, have your dealer drain the locales to help reduce emissions to meet clean fuel tank and replace with the correct fuel. -
Page 175: Authorized Manuals
Authorized Manuals Authorized Manuals These Honda manuals are written for the professional technician. However, if you possess The Service Manual used by your the proper tools, observe the safety standards, authorized dealer is available from your Honda and are mechanically capable, you should find dealer or Helm, Inc. -
Page 176: Warranty Coverage And Service
Service and deterioration associated with use of the vehicle. Coverage Your new Honda is covered by the following Your warranty coverage is not voided if you warranties: perform your own maintenance. However, Vehicle Limited Warranty ●... - Page 177 Warranty Coverage and Service authorized service provider caused damage to Statement on Warranty Coverage for another part of the vehicle otherwise covered Aftermarket and Recycled Parts under warranty before denying warranty The Magnuson-Moss Warranty Act, 15 U.S.C. s. coverage. Additionally, federal law allows a 2301 et seq., makes it illegal for motor vehicle manufacturer to void a motor vehicle warranty manufacturers to void a motor vehicle warranty...
- Page 178 If you believe you have a problem with your dealership or their designated representative. vehicle, call the service department of your Honda dealer. Make an appointment for an inspection and diagnosis. You will be asked to authorize that inspection, and your dealer will return the results of the inspection.
-
Page 179: Honda Contacts
P.O. Box 2200, Torrance, CA 90509-2200 Product model, year, and VIN ● Mailstop: 100-4W-5F Date of purchase ● Dealer name and address ● Telephone: (866) 784-1870 We will likely ask your Honda dealer to respond, or possibly acknowledge your comments directly. Website: https://powersports.honda.com/ contact-us Continued... - Page 180 Honda Contacts Your Honda Dealer The service department of your Honda dealer offers trained personnel to perform regular maintenance and unexpected repairs. It has the latest available service information from Honda and also handles warranty inspections and repairs. The parts department offers Honda Genuine...
-
Page 181: Reporting Safety Defects
Reporting Safety Defects Reporting Safety Defects dealer, or American Honda Motor Co., Inc. To contact NHTSA, you may call the If you believe that your vehicle has a Vehicle Safety Hotline toll-free at: defect which could cause a crash or... - Page 182 However, Transport Canada cannot become involved in individual problems between you, your dealer, or Honda Canada Inc.
-
Page 183: Specifications
Specifications Main Components ■ 2.538 Overall length 83.5 in (2,120 mm) 1.941 Overall width 31.1 in (789 mm) 1.578 Gear ratio Overall height 42.9 in (1,090 mm) 1.363 Wheelbase 57.3 in (1,455 mm) 1.217 Minimum ground 1.115 5.3 in (135 mm) clearance Reduction ratio 1.604 / 2.933... - Page 184 SAE 10W-30, JASO T 903 Tire type Radial, tubeless engine oil standard MA, Pro Honda GN4 4-stroke oil MICHELIN POWER 5 (USA & Canada) or Honda 4-stroke oil, or Front PIRELLI DIABLO ROSSO Ⅲ E Recommended an equivalent motorcycle oil Tire...
- Page 185 Specifications Bulb ■ Headlight Brake light/Taillight Front turn signal/Position light LED Rear turn signal License plate light Fuse ■ Main fuse 30 A Other fuse 30 A, 15 A, 10 A, 7.5 A...
- Page 186 Information Record Engine No. Color Label & Code Owner's Name Address City/State Phone Dealer's Name Address City/State Phone Service Manager...
- Page 187 California Proposition 65 Warning WARNING: Operating, servicing and maintaining a passenger vehicle or off-highway motor vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.
- Page 188 31MKJ640 00X31-MKJ-6400 PRINTED IN USA...