Surface Plasmon Resonance - SPR

When the beam of light is passed through the prism and strikes the metal surface like gold and silver, it generates electron charge density waves at the inference between two media called plasmons. The light passed through the metal surface gets reflected with reduced intensity. 

The angle at which surface plasmons occur is known as the resonance angle. SPR phenomenon results in the graded reduction of the intensity of light depending on the thickness of a molecular layer at a metal surface.

Surface Plasmon Resonance (SPR) enables label-free detection of biomolecular interactions in real-time. The applications of SPR primarily involve life science research, quality control, electrochemistry, gas phase, and pharmaceutical development.

SPR nature of sensitivity to the refractive index of the medium next to the metal surface has resulted in many biomedical applications. This nature of SPR makes it possible to measure the absorption of molecules and their interactions with specific ligands accurately.

In recent days, the SPR technique is widely used in biomedical applications. This technique is used for various purposes such as real-time measurement of the kinetics of ligand-receptor interactions, screening of compounds in the pharmaceutical industry, enzyme-substrate interactions, epitope mapping, measurement of DNA hybridization, polyclonal antibody characterization, protein conformation studies, and label-free immunoassays.

History of Surface Plasmon Resonance

In the year between 1902 to 1912 R.W. Wood at John Hopkin University (Baltimore, USA) observed that when the polarized light hits the metal-backed diffraction grating, dark light bands appeared in the reflected light. His research was about light, gratings, and metal interactions but there is no answer for this phenomenon was provided.

In 1907 Lord rayleigh based his theoretical research on the scattering of light in the electromagnetic field. He found that the scattered electromagnetic field was singular at wavelengths for one of the spectral orders that arose from the grating at the grazing angle. These wavelengths 位R are said to be rayleigh wavelengths that correspond to wood anomalies. 

It is observed that these singularities appeared only when the rulings are perpendicular to that polarized electric field and are accounted for S anomalies for P polarization. In the later years, Palmer observed that both the P anomalies and S anomalies are obtainable but the P anomalies were found only in the deep ruled gratings. 

In 1941 theoretical analysis undertaken by Fano concluded that these anomalies were related to surface waves or surface plasmons supported by the grating. 

In 1968 Otto demonstrated Surface Plasmon Resonance but it was made commercially available for biomolecular interaction after 1990.

How does the Surface Plasmon Resonance work?

Surface Plasmon Resonance occurs when the polarized light hits the metal surface (typically gold or silver) at the interface of media with different refractive indices. SPR techniques excite and detect the oscillations of free electrons on the metal surface that is termed surface plasmons. With Kretschmann鈥揜aether configuration, the light is focussed on the metal surface through the prism and the reflection of light is detected.

At a certain incident angle or resonant angle, the metal surface absorbs light as the plasmons are set to resonate. This results in a dip in reflection intensity and creates a dark band in the detector as shown below - 

Most frequently proteins are immobilized on the metal surface, potential ligands are injected over the surface through a series of flow cells. During these biomolecular interactions, the resonant angle of minimum reflected light intensity is detected. 

This resonant angle changes as the molecules bind (association constant, Ka) and the dissociation (dissociation constant, Kd). These interactions are recorded in real-time with the SPR sensorgram.

Variations of SPR and Similar Biosensors

SPR is a common technique with some variations are described above

• SPR imaging (SPRi) - SPRi monitors SPR signal ar particular location on the surface. SPRi is often used for multiplexing applications to monitor multiple reaction spots simultaneously.
• Localized SPR - In such case it generates a signal from metal nanoparticles and not at the flat surface.
• Biolayer Interferometry (BLI) - Biolayer Interferometry (BLI) is also similar to SPR. It is an optical and label-free technique but the physics of signal generation is slightly different and the measurement process is similar to that of SPR. In this technique the biomolecules are immobilized  to the sensor surface and monitors the binding in real time. The sensors used in this technique can also be regenerated. 

In case of BLI, sensor tips are used and is dipped into the sample during measurement rather than flowed over the surface as in SPR.

Conclusion

Surface Plasmon Resonance is a phenomenon that is widely used in recent days. This technique is applied in biosensing instruments extensively used to determine the association and dissociation kinetics, nucleic acid hybridization, protein-ligand, protein-protein interactions. SPR spectroscopy is important to carry out nanostructure, and also in label-free chemical and biological sensing.